Asante Technologies 3500 Series - Manual (Page 78)

78
Appendix B. Features and Specifications
The sections below list the features and product specifications for the IntraCore 3500 Series Gigabit
Ethernet switches.
B.1 Features
The following is a summary of the management features of 3500 Series Gigabit Ethernet Switch:
Graphical User Interface: HTML browser-based with password protection for local and remote
management
Command Line Interface: Menu-driven telnet or in-band (via front panel console port)
Front Panel:
Graphical representation of unit with real-time network status
General Information: Software version, dual firmware banks. Admin, system and bootstrap info. Switch
address and system clock
Statistics: User-configurable graph types (bar chart, line chart, table) and counters (since
up, rate, since reset) for RX/TX/Error for each port and unit. Table view also
shows current, peak average and total packets for each port
Port Configuration: State (forwarding, blocking), status (enabled, disabled), link status (up, down)
and mode (speed, duplex), auto negotiation, flow control, priority and security.
Detailed statistics include TX counters (total frames, total bytes, dropped
frames), RX counters (total frames, total bytes, unicast, non-unicast), frame
counters (multicast, broadcast, by packet sizes), collisions and errors
(undersized, oversized, CRC/alignment, fragments, FCS, late events, total)
Spanning Tree: Displays bridge ID, designated root, root port, root port cost, hello time, maximum
age and forward delay. Ports are individually configurable for STP parameters
(priority, path cost)
SNMP: Separate read and write communities, and trap authentication. Four configurable
trap receivers (IP address and community)
Address Table: Per-port counts for Mac and IP addresses. Integrated utilities to sort or search for
specific IP/MAC address. Address table shows unit, port, entry (dynamic, static
or multiple), IP address, MAC address and VID
VLAN: Configurable PVID, frame type and ingress filtering
RMON: Embedded remote monitoring supports four groups (history, statistics, alarms
and events)
Security: Configurable per-port security with programmable action (e.g., new node
detection trap) and trusted MAC address
Supported OS: Windows 95/98/Me/NT/2000/XP, Mac OS 9/X, and Linux
Other: Integrated utility to detect duplicate IP addresses (port, owner MAC address, IP
address and spoofer MAC address)
B.2 Specifications
Connectors: IC3524
Models:
24 Fast Ethernet with Auto-Uplink™ (100BaseTX, 10BaseT): RJ-45
Console: Serial (RS-232): DB9
IC3548-2GT:
48 Fast Ethernet with Auto-Uplink (100BaseTX, 10BaseT): RJ-45
2 fiber GBIC connectors
2 copper 10/100/1000 RJ-45
Expansion (IC3524 only): 2 front-mounted slots for Type IC35 modules (Gigabit or Fast Ethernet, copper or
fiber)
Optional Fast Ethernet (100BaseFX): SC
Optional Gigabit Ethernet with Auto-Uplink (1000BaseT, 100BaseTX, 10BaseT):
RJ-45
Optional Gigabit Ethernet (1000BaseSX): SC