Asante Technologies 3500 Series User Manual
Page 34

34
+------+----+----+-----------------+---------+ 
|Unit|Port|Type| MAC Address | PVID | 
+------+----+----+-----------------+---------+ 
 1 17 D 00:00:94:00:00:10 0001 
 1 17 D 00:00:94:75:2B:D0 0001 
 1 17 D 00:00:94:93:21:38 0001 
 1 17 D 00:00:94:B4:7E:34 0001 
 1 17 D 00:00:94:C6:51:07 0001 
 1 17 D 00:00:94:C6:FC:43 0001 
 1 17 D 00:00:94:CB:5F:0E 0001 
 1 17 D 00:00:94:CC:C4:E5 0001 
 - -- I 00:00:94:CC:C5:36 -- 
 1 17 D 00:00:94:CC:C7:37 0001 
 1 17 D 00:0A:27:89:94:A4 0001 
 1 17 D 00:10:A4:B0:41:F9 0001 
 1 17 D 00:30:65:E7:17:8C 0001 
 1 17 D 00:40:33:E3:0A:83 0001 
 1 17 D 00:40:F4:29:A2:D5 0001 
 1 17 D 00:80:AD:B6:91:F9 0001 
 1 17 D 00:A0:24:9A:1E:4E 0001 
 1 17 D 00:C0:02:55:13:67 0001 
 1 17 D 00:E0:52:01:44:46 0001 
Quit Next Page
3.9.2 Searching for a MAC Address
 
The Unicast Forwarding Database can be searched by MAC address or by IP address. To search for a 
specific MAC or IP address, use the following procedure: 
 
1. Access the Unicast Forwarding Database Configuration Menu by typing d in the Configuration
Menu.
2. Type
m to search for a MAC address.
Type i to search for an IP address.
3. Type the MAC or IP address at the prompt. 
4. Press 
Enter.
 
If the address is located, it is displayed, with its associated information. If the address is not located, a 
message appears, stating this. 
 
The Search Summary screen tells the location of the MAC or IP address, the unit, port, and the domain 
name. Configuration information, such as the type, age, and priority are also displayed. 
 
3.9.3 Setting the MAC Address Age-Out Time
 
This option sets the Age-Out Time for the MAC Forwarding Table. 
 
The Age-Out Time is the number of seconds that addresses remain in the table after being learned by the 
switch. The default is 300 seconds. 
 
Use the following procedure to set the MAC address Age-Out Time. 
 
1. Access the Unicast Forwarding Database Configuration Menu by typing d in the Configuration
Menu.
2. Type
t to set the MAC Address Age-Out Time.
3. Enter the new Age-Out time (in seconds) at the prompt. 
4. Press 
Enter.
 
The MAC Address Age-Out Time is changed and is displayed at the top of the Unicast Forwarding Database 
Configuration Menu. 
 
