White’s Electronics Spectra VX3 - Manual (Page 78)

Page 8-4
Spectra VX 3 User’s Guide
to be picking up audio from another VX 3 , try a different chan-
nel. Pay attention to the reception bar when selecting a channel;
choose a channel that has a maximum green and minimal red
response.
Finally, the WHPs send back a battery voltage status to VX 3
and the voltage is reported in the WHP menu. If the WHPs
begin to act erratic, check the voltage; if its at 1.8-1.9 Volts,
replace the batteries.
Tip: If you run the connect sequence at the same time as
another nearby V-user, you may inadvertently connect
your WHPs to the wrong detector.