Warner Electric WSCC-102 - Manual (Page 2)

2 Warner Electric • 800-825-9050 P-239-38 • 819-0400
Failure to follow these
instructions may result in product damage,
equipment damage, and serious or fatal injury
to personnel.
Introduction
Warner Electric's One Shot Octal Socket Power
Supply is a plug-in clutch/brake control
designed for operation of AC or DC wrap spring
clutches and brakes. The One Shot provides a
single voltage pulse of 160 or 325 VDC for
approximately 15MS, whether the customer
supplied switch is momentarily closed or held
closed, and can be used with all 12VDC, 24VDC,
90VDC, and 115VAC D-frame solenoid operated
products that contain an Actuator Limit Stop
option.
The One Shot Power Supply is UL Listed when
used with Warner Electric's octal socket, part no.
6001-101-001, or DIN rail mount octal socket,
part no. 6001-101-002 (each purchased
separately) and only UL Recognized when used
with other sockets. This unit may be mounted in
any convenient position using the two mounting
holes provided on the socket.
Specifications
Input: 120/240 VAC, 50/60 Hz
Output: 160/290 VDC peak
5 amps max. load
Ambient Temp.: +32° to +122°F (0° to 50°C)
Cycle Rate: The maximum cycle rate is
400 CPM*.
*See Table 1 for maximum cycle rates by input
and solenoid
Installation
1. Connect the two leads from the wrap spring
solenoid to terminals 6 and 7 of the octal
socket.
2. Connect the common of the relay to terminal
1 of the socket, the normally closed to
terminal 2, and the normally open to
terminal 8.
3. Connect the HOT AC input wire to terminal
3 of the socket and the neutral wire to
terminal 4.
Reorder Information
Model Part No.
One Shot Power Supply 901-00-019
Octal Socket 6001-101-001
DIN Rail Mount Octal Socket 6001-101-002
Warner Electric’s Complete
Line of Wrap Spring Products
Standard CB
Super CB
(SCB)
WSC
Controls
Series Torque Models
Ratings
f rom 25 lb.in CB-2, CB-4,
to 2,500 lb.in CB-5, CB-6
and CB-8
from 250 lb.in Super CB-5,
to 2,500 lb.in Super CB-6
and Super CB-8
from 25 lb.in WSC-2, WSC-4,
to 2,500 lb.in WSC-5, WSC-6
and WSC-8
One Shot Power Supply WSCC-
101 and One Shot Octal Socket
Power Supply WSCC-102
120 200 CPM
240 35 CPM
120 300 CPM
240 40 CPM
120 400 CPM
240 60 CPM
120 350 CPM
240 45 CPM
VAC
Input
Maximum Cycle
Rate
Solenoid
Table 1
12 VDC
24 VDC
90 VDC
115 VDC
Installation Instructions
Part # 901-00-019