Warner Electric MCS-165F - Manual

Failure to follow these
instructions may result in product damage,
equipment damage, and serious or fatal injury
to personnel.
Warner Electric • 800-825-9050
MCS-165F - Light Guide Kits
Installation Instructions
P-241-91
819-0503
Retroreflective Or Proximity Sensing:
3 ft. straight threaded: 7420-448-017
3 ft. right angle:
7420-448-028
3 ft. straight threaded: 7420-448-018
3 ft. right angle:
7420-448-027
3 ft. straight threaded: 7420-448-022
3 ft. right angle:
7420-448-028
Thru-Beam Sensing:
3 ft. single straight threaded: 7420-448-019
3 ft. single right angle: 7420-448-023
3 ft. single straight threaded: 7420-448-020
3 ft. single right angle: 7420-448-024
3 ft. single straight threaded: 7420-448-021
3 ft. single right angle: 7420-448-025
Note: For thru-beam sensing two of each single cables
must be used.
Ambient Temperature: 0 to 221°F., -18 to 105°C
Installation
Domed sealing nut is to be loosened and cable
installed per Illustration 1. Sealing nut is then to be
snugly tightened with 19/32” wrench. See Illustration 1.
The straight threaded cables may be mounted by using
the supporter bracket, part number 7430-448-009, and
the two jam nuts supplied on the cable ends.
See dimensions for head sizes and right angle radius,
etc.
Accessories
Auxiliary Lens Assembly 7420-448-016
Description
The Warner Photoscanner MCS-165F Light Guide Kits
are the fiber optic light guide kits for use with the base
control photoscanner MCS-165F-XX.
The light guides are designed to make a photo-optic
sensing possible in hard to get to areas as well as
harsh environments.
Fiber optic cables are comprised of thousands of tiny
glass or plastic strands. A light beam entering a fiber
optic cable bounces from one wall of each strand to
the opposite wall, reflecting back and forth over the
entire length of the strand. Through-beam models
move light in only one direction while reflective/proximi-
ty types transmit and receive through separate strands
of the same cable.
Dimensions
1Ω
13/16
.187 A
D
1/2R
.250
9/16
A
1 1/16 ± 1/32
5/16-24 Thread
Straight End
Right Angle End
Sealing
Nut
Illustration 1
Not To Be
Removed