Vestil PM-SCALE User Manual
Page 20
12
Selection:
0…FS(Factory default 10d)
F2.2.4 – Minus
Tolerance
Selection:
0…FS(Factory default10d)
F2.3 – APW Enhancement(F2.1 is set to Counting)
Selection:
On,OFF(Factory default)
F2.10 – F2 reset to Factory default
All
F2 parameters will be set to Factory default.
F3 – Terminal
F3.1 – Display
F3.1.1 – Timeout
Selection:
0,
~
10 999 seconds (Factory default 60s) 0 will disabled this
function.
F3.1.2 – Brightness
Selection:
Lo(Factory default)
- Low bright
HIGH -
High
bright
Recommend to set Low if you use battery to operation.
F3.2 – Auto power off
Selection:
0, 5
~
60 minutes (Factory default 5 minutes) 0 will disabled this
function.
F3.3 – Battery type
Selection:
drY(Factory default)
－ Dry battery
ni-ÑÖx
－ Ni-MH rechargeable battery
LEAd-A
－ Lead-Acid rechargeable battery
F3.10 – F3 reset to Factory default
All
F3 Parameters will be set to Factory default.
F4 – Communication
F4.1 – Connections
Selection:
Print(Factory default) - Demand print
APrint -
Auto
SICS
- SICS
Contin -
Toledo
continuous
mode
F4.2 – Format
F4.2.1 – Line format
Selection:
ÑÖULti(Factory default) - Multi line
SinGLE
- Single line