Vestil PM-SCALE User Manual
Page 19
11
F1.5.1 –Auto Tare
Selection:
On,OFF(Factory default)
F1.5.2 – Auto Clear
Selection:
On,OFF(Factory default)
F1.5.3 – Tare Interlock
Selection:
On,OFF(Factory default)
F1.5.4 – Auto Tare threshold.
Selection:
0 ~ FS(Factory default10
d
)
F1.5.5 – Auto Tare reset threshold
Selection:
0 ~ FS(Factory default10
d
)
F1.6 – Digital filter
F1.6.1 – Digital filer
Selection:
Lo
- Low
ÑÖEd (Factory default) - Middle
HIGH
- High
F1.6.2 – Motion range
Selection: 0.5d(Factory default),1d,3d
F1.10 – F1 Factory default
Reset
all
F1 parameters to Factory default. Not include calibration values.
F2 – Application
F2.1 – F key function
Selection:
ÑÖUL10(Factory default)
- x10
Unit
- Unit switch
OVEr
- Over/Under
Count
-
Counting
F2.2 – Over/Under function
F2.2.1 – Display mode
Selection:
CHECh(Factory default) - Check weighing
CLASS
- Classifying
F2.2.2 – Target Input
Selection:
WEIGHt(Factory default)- By weight
MAnUAL
- Manually
F2.2.3 – Plus Tolerance