Vestil PM-SCALE - Manual (Page 13)

8
3.2.4 Clear
Clear the tare, the display will go back to gross mode.
3.2.5 Print
Print the current weight.
3.3 Expand functions
3.3.1 X10 Function
F2.1 is set to ÑÖUL10 - x10 function.
Press
F
key, The terminal will show
more accuracy weight for 20 seconds.
Print is forbidden in this mode.
3.3.2 Unit switch
F2.1 is set to Unit – Unit switch
Press
F
key, you can switch the weight
units at kg or lb.
3.3.3 Over/Under Function
F2.1 is set to OVEr - Over/Under function
z F2.1.1 is set to CHECh - Check weighing mode.
Target weight setting:
Press
F
key to switch Over/Under mode.
Hold
F
key for 2 seconds. Or you can
press Tare key to tare the weight.
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Count APW PCS NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
Under OK Over NET >|1|< >|2|< lb kg
C