Vanguard CT-3500 S2 - Manual (Page 48)

CT-3500 S2 USER’S MANUAL REV 1
44
3.6.7. Erasing Test Records from the Flash EEPROM
Follow the steps below to erase test records from the Flash EEPROM
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the
[2]
key (SAVE / RESTORE).
c. The following screen will be displayed:
Press the
[4]
key (ERASE SHOT).
d. The following screen will be displayed:
1. ERASE SINGLE SHOT
Press the
[1]
key (ERASE SINGLE SHOT) to erase a single test record from the unit’s
internal Flash EEPROM. The following screen will be displayed:
ERASE SHOTS
1.ERASE SINGLE SHOT
2.ERASE ALL SHOTS
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. SHOT DESCRIPTION
2. SAVE / RESTORE
3. SET 50/60 HZ
4. SET DATE & TIME
1. TIME BRKR 05/16/12
2. GET RSLT 09:55:55
3. SETUP
4. DIAGNOSTICS