Vanguard CT-3500 S2 User Manual

Page 39

REV 1 CT-3500 S2 USER’S MANUAL

d. The following screen will be displayed:

NOTE

If you have a USB Flash drive inserted in the unit’s “USB MEM” port, the
following screen will be displayed instead of the above screen:

Press the

[1]

key (INTERNAL STORAGE).

The following screen will be displayed:

Continue with the steps below.

1. ENTER SHOT NUMBER

Press the

[1]

key (ENTER SHOT NUMBER) if you know the record number that

you would like to restore.

1.1. The following screen will be displayed:

Type the shot number using the keypad and then press the

[ENTER]

key.

RESTORE SHOT NUM:

RESTORE SHOT

1.ENTER SHOT NUMBER
2.SCROLL TO SELECT

1.INTERNAL STORAGE
2.THUMB DRIVE

RESTORE SHOT

1.ENTER SHOT NUMBER
2.SCROLL TO SELECT