Vanguard CT-3500 S2 - Manual (Page 26)

CT-3500 S2 USER’S MANUAL REV 1
22
NOTE
You can also view the test results on the unit’s LCD screen. Please see section
3.6.1.
e. The test results will be printed (please see Figure 6) and the following screen will be
displayed:
.
Press the
[1]
key (YES) to save the test shot.
NOTE
If a USB Flash drive is connected to the unit’s “USB MEM” port, the following
screen will be displayed:
1. SAVE INTERNALLY
Press the [1] key (SAVE INTERNALLY) to save the test shot to the unit’s
internal memory. Continue to step f.
2. SAVE TO THUMB DRIVE
Press the
[2]
key (SAVE TO THUMB DRIVE) to save the test shot to the
connected USB Flash drive. The test record will be saved and the following
screen will be displayed:
Press any key to return to the “START-UP” menu.
REC_000 SAVED TO
THUMB DRIVE.
1.SAVE INTERNALLY
2.SAVE TO THUMB DRIVE
SAVE THIS SHOT?
1.YES
2.NO