Vanguard CT-3500 S2 - Manual (Page 46)

CT-3500 S2 USER’S MANUAL REV 1
42
3.6.6. Printing the Test Record Directory
Use the steps below to print a directory of the test records stored in the CT-3500 S2’s Flash
EEPROM memory or on a connected USB Flash drive:
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (SAVE / RESTORE).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) is listed only if a USB Flash drive is
connected to the unit.
Press the [3] key (SHOT DIRECTORY).
If a USB Flash drive is not connected to the unit, a directory of the shots stored in the
unit’s Flash EEPROM will be printed. You will be returned to the “START-UP” menu
when printing is finished.
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. SHOT DESCRIPTION
2. SAVE / RESTORE
3. SET 50/60 HZ
4. SET DATE & TIME
1. TIME BRKR 05/16/12
2. GET RSLT 09:55:55
3. SETUP
4. DIAGNOSTICS