Vanguard ATRT-01_01B S3 - Manual (Page 55)

REV 1 ATRT-01/01B S3 USER’S MANUAL
51
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the ATRT’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the [1] key (ERASE INTERNAL REC).
The following screen will be displayed:
Continue with the steps below.
1. ERASE SINGLE REC.
Press the [1] key (ERASE SINGLE REC.) to erase a single test record from the unit’s
internal Flash EEPROM. The following screen will be displayed:
1. ENTER RECORD NUMBER
Press the
[1]
key (ENTER RECORD NUMBER) if you know the record number that
you would like to erase. The following screen will be displayed:
ERASE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT
1.ERASE INTERNAL REC
2.ERASE THUMB DRV REC
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT