Vanguard ATRT-01_01B S3 - Manual (Page 22)

ATRT-01/01B S3 USER’S MANUAL REV 1
18
3.5 Setting the Frequency (ATRT-01B S3 Only)
Follow the steps below to set the preferred frequency (50 or 60 Hz):
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [7] key (SET 50/60 HZ).
c. The following screen will be displayed:
Select the preferred frequency by pressing the corresponding key on the keypad ( [1] or
[2] ). The frequency will be set and a confirmation screen will be displayed as shown
below:
Press any key to return to the “START-UP” menu.
60 hz set
1. 60 Hz
2. 50 hz
1. RECORD ID
2. TEST VOLTAGE
3. PRINT RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. SET LANGUAGE
7. SET 50/60 HZ
1. TEST TRANSFORMER
2. SETUP
3. CALCULATOR
bAT:
time: 14:21:34
date: 05/24/11