TREND IQView.._RPM - Manual (Page 5)

5 IQView../RPM Installation Instructions TG200712 Issue 1/F 10/01/07
Installation Instructions IQView../RPM
3.1 Installation - Mounting
(continued)
Load on when
Alarm not present,
(Relay off)
Relay Output Arc Suppression
Installation Instructions TG200208
11
3 2 1
1
LINK
RS232 Rx Tx
OK
28-36 V
24 V ETHERNET
OK
DATA R+ R- T+ T-
7 6 5 4
AC rating: 62.5 VA e.g 40 Vac max @ 1.5 A, 24 Vac @ 2.5 A
DC rating: 60 W e.g. 40 Vdc max @ 1.5 A, 24 Vdc @ 2.5 A
Note that UL rating applies up to 30 V maximum
Connect Relay Output
Arc suppression
r e c o m m e n d e d
WARNING: The wires may be connected to
hazardous voltages. Disconnect
power before attampting any wiring.
Load on when
Alarm present,
(Relay energised) 3
2
1
power
load
3
2
1
power
load
3 2 1
1
rear view
of connector
Note that the relay output alarm action must be enabled (it is disabled by default), see 2.2 step 15.
if required (for alarm notification)