Reference, Specifications, Certifications – Teledyne LeCroy WaveLink Differential Probe Series (8-13 GHz) User Manual
Page 57

Operator's Manual
Reference
Specifications
Please refer to the Teledyne LeCroy website at teledynelecroy.com for detailed specification
information.
NOTE: Specifications are subject to change without notice.
Certifications
This section certifies the probe's EMC, Safety, and Environmental compliance.
EMC Compliance
EC D
ECLARATION
O
F
C
ONFORMITY
- EMC
The probe meets the intent of EC Directive 2004/108/EC for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the Official Journal of the
European Communities:
EN 61326-1:2:2013, EN 61326-2-1:2013 EMC requirements for electrical equipment for
measurement, control, and laboratory use.
Electromagnetic Emissions:
EN 55011/A1:2010, Radiated and Conducted Emissions Group 1, Class A
1, 2
Electromagnetic Immunity:
EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV vertical/horizontal coupling
planes
EN 61000-4-3/A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80-1000 MHz; 3 V/m, 1400 MHz
- 2 GHz; 1 V/m, 2 GHz - 2.7 GHz
1 Emissions which exceed the levels required by this standard may occur when the probe is connected to a test
object.
2 This product is intended for use in nonresidential areas only. Use in residential areas may cause
electromagnetic interference.
924234-00
51