Teledyne LeCroy WaveLink Differential Probe Series (8-13 GHz) - Manual (Page 28)

WaveLink Medium-Bandwidth (8-13 GHz) Differential Probe
Measuring with SI Interconnect Lead
SMA/SMP Lead
The SMA interconnect system has been designed to connect directly to female SMA connectors as
well as to the higher performance 3.5 mm and 2.92 mm female connectors. The interconnect lead
connects to the probe module and the matched pair of SMA leads connects to the interconnect lead.
The SMA leads use the same connectors as in the interconnect leads and will physically mate with
the probe tip module. However, the system will not work properly in this configuration. No damage
to the probe or amplifier will occur. However, maximum voltage to prevent destruction will be much
lower and the susceptibility to ESD is reduced.
Note: The SMA input leads are supplied as a matched pair. Individual cables should not be
interchanged between probes.
An SMA finger wrench is supplied to aid in tightening the SMA connectors. The SMA connector
should be tightened to a torque of 8 in-oz. This finger tight can be approximated when using the
wrench.
22 924234-00