Teledyne LeCroy AP015 - Manual (Page 7)

Operator’s Manual
922254-00 Rev A 3
Specifications
The following specifications are valid for model AP015 current probes after the
probe has reached operating temperature, which is 20 minutes with power
applied in a environment with stable ambient temperature. The probe must be
operating within the environmental conditions listed in the General
Characteristics section, and has been calibrated within the past 12 months in an
ambient temperature of 23 ±5 °C.
Nominal Characteristics
Nominal characteristics describe parameters and attributes which are
guaranteed by design, but do not have associated tolerances.
Interface: ProBus
Coupling: AC, GND, DC
Maximum Current: DC ±30 A (continuous)
±50 A maximum (< 10 s)
Sensitivity: 10 mA/div to 20 A/div
Offset Range: ±100 A maximum
Maximum Conductor Size: 5 mm
Maximum Voltage 300 V CAT I
(bare conductor): 150 V CAT II
Cable Length: 2 m
Weight (probe only): 300 g (10.6 oz.)
Warranted Electrical Characteristics
Warranted characteristics describe parameters which have guaranteed
performance. Unless otherwise noted, tests are provided in the Performance
Verification Procedure for all warranted specifications.
DC Accuracy: ± 1% of reading to 15 A
(at 25 °C, after degauss)
± 2% of reading to 30 A
(at 25 °C, after degauss)
Bandwidth: DC to 50 MHz