Teledyne LeCroy AP015 - Manual (Page 5)

Operator’s Manual
922254-00 Rev A 1
Safety Instructions
This section contains instructions that must be observed to keep this
oscilloscope accessory operating in a correct and safe condition. You are
required to follow generally accepted safety procedures in addition to the
precautions specified in this section. The overall safety of any system
incorporating this accessory is the responsibility of the assembler of
the system.
Symbols
These symbols may appear on the probe body or in this manual to alert you to
important safety considerations.
WARNING. High Voltage, risk of electric shock.
CAUTION. Potential for damage to probe or instrument it is connected
to. Attend to the accompanying information to protect against
personal injury or damage. Do not proceed until conditions are fully
understood and met.
ELECTROSTATIC DISCHARGE (ESD) HAZARD. The probe is susceptible
to damage if anti-static measures are not taken.
DOUBLE INSULATION
PROTECTIVE (EARTH) TERMINAL
Precautions
To avoid personal injury or damage to property, review and comply with the
following safety precautions.
Use product only as specified. Use of the probe is restricted to insulated
conductors or limited energy circuit conductors.
Connect and disconnect properly. Connect probe to the measurement
instrument before making any connections to a voltage/current source.