Teledyne LeCroy Zi Oscilloscope Rackmount - Manual (Page 7)

Zi Rackmount Accessory
3. On the right side, remove the two long M3 X 10 and three short M3 X 6 screws using the T10 Torx
driver, and take off the cover.
4. On the left side, remove the two M3 X 10 screws on the lower cover and six M3 X 6 screws on the
upper cover using the T10 Torx driver. Take off both left side covers.
7 922291-00 Rev A