Teledyne LeCroy Zi Oscilloscope Rackmount - Manual (Page 10)

Instructions
2. Position the left bracket so that the cutouts fit over the remaining screws and align with the empty
screw holes. The handle should be facing toward the front of the oscilloscope.
3. Use the same M3 X 6 Torx screws with washers removed in Step 1 to attach the left bracket to the
left side of the oscilloscope.
4. Intall the right bracket in the same manner as the left.
NOTE: The right and left bracket are not interchangeable. The screw holes should only line up cor-
rectly with the handle facing forward.
922291-00 Rev A 10