Teledyne LeCroy Zi Oscilloscope Rackmount - Manual (Page 4)

Instructions
3. On the right side, remove the two long M3 X 10 and two short M3 X 6 screws using the T10 Torx
driver.
Remove the four M4 X 12 screws using the 3mm Allen key and take off the right side cover.
4. On the left side, remove the M3 X 10 and M3 X 6 screws using the T10 Torx driver and take off the
left side cover.
922291-00 Rev A 4