LevelOne FCS-8006 - Manual (Page 90)

Intelligent Surveillance Solution
LevelOne IP CamSecure
- 89 -
5.15 About Main Console
Go to About Main Console for detailed system and license information.
5.16 Video Source
(For system with MPEG4 capture device only, not supported under Lite license)
Step 1: Go to Video Source to adjust the Video Standard to NTSC or PAL.
Step 2: Adjust the maximum Video Resolution for all analog cameras.
Video Resolution Frame Rate Quality
Turbo mode Higher Lower
Standard mode Normal Normal
High Quality mode Lower Higher
Step 3: Click Sync all video signal level after pressing OK to synchronize video signal level to the optimized
display (Auto-gain control).