5 central management service – LevelOne FCS-8006 User Manual
Page 89
Intelligent Surveillance Solution
LevelOne IP CamSecure
-
88 -
Options:
Port:
Assign a port for Desktop tool to login and configure system.
Disconnect idle client after (300~3600 sec):
Auto disconnect the on-line user who idled more than set
period.
Authentication:
Enabling this option would only allow admin account to use Desktop tool to login system.
Service:
Server Status:
Click on Start/Stop to turn on/off this option.
5.14.5 Central Management Service
* Note: This function is not available under Lite license.
This service only supports Central Management System (CMS). When starting the Central Management
Service option of the system, the Main Console would send event information to NCS and allow NCS system
to control I/O device from remote side .
Note:
1. To enable this action, go Guard >Action and select “Send to Central Server” to enable the action
triggered by preference event.
2. Please refer to the user manual of Central Management System for detailed information.
Client list:
Client Count:
Show the amount of NCS Servers that are connected to system.
Kill Client:
Highlight an IP address and click on the “Kill Client” button to block the client from your client
list.
Kill All Clients:
Click on this button and then block all the clients logged in to your system.
Service:
Server Status:
Click on Start/Stop to turn on/off this option.
Options:
Adjust the setting only when the server is stopped.
Port:
Assign a port for NCS System to connect Main Console system. Default port is 5170.
Number of connections from NCS Servers that are allowed to connect to the system. The default is 8
NCS Servers and maximum is 16.
Client
Service
Options