LevelOne FCS-1091 User Manual
Page 9
5
LAN port
Use a standard LAN cable to connect your FCS-1091/WCS-
1090 to a 10/100BaseT hub or switch.
Note:
• Attaching the LAN cable will disable the Wireless
interface. Only 1 interface can be active at any time.
• The LAN cable should only be connected or disconnected
when the camera is powered OFF. Attaching or detaching
the LAN cable while the camera is powered on does NOT
switch the interface between wired and wireless.
Power Input
Connect the supplied 12V power adapter here. Do not use
other power adapters; doing so may damage the camera.
GPIO
The GPIO terminal block includes 2 input ports and 2 output
ports.
MIC In
If required, an external microphone can be attached here.
Attaching a microphone here will disable the built-in
microphone on the front. Microphones which are designed to
be used with PCs are usually compatible with this microphone
input.
SPKR out
If required, an external speaker can be attached here.