LevelOne FCS-1091 User Manual
Page 6
2
•
Night/Day Switch Support.
Supporting IR-cut filter, the FCS-1091/WCS-1090
can get better video quality even in the nighttime.
•
Suitable for Home, Business or Public Facilities
. Whether for Home,
Business or Public Facility surveillance, the FCS-1091/WCS-1090 has the
features you need.
•
Multi-Protocol Support.
Supporting TCP/IP networking, SMTP (E-mail),
HTTP and other Internet related protocols, the FCS-1091/WCS-1090 can be
easily integrated into your existing network.
•
Easy Configuration.
A Camera Wizard is provided for initial setup.
Subsequent administration and management can be performed using a standard
web browser. The administrator can configure and manage the FCS-1091/WCS-
1090 via the LAN or Internet.
• Viewing/Recording Utility.
IP CamSecure Lite version is provided for viewing
live video. For periods when you are absent, or for scheduled recording. Users
can monitor up to 32 channels simultaneously.
•
Motion Detection.
This feature can detect motion in the field of view. The FCS-
1091/WCS-1090 will compare consecutive frames to detect changes caused by
the movement of large objects. Motion detection alarm can be triggered via e-mail,
FTP, instant messaging and/or an external alarm device.
•
Flexible Scheduling.
You can limit access to the video stream to specified
times using a flexible scheduling system. The Motion Detection feature can also
have its own schedule, so it is active only when required.
•
Syslog Support.
If you have a Syslog Server, the FCS-1091/WCS-1090 can
send its log data to your Syslog Server.
•
Audio Support.
You can listen as well as look! Audio is encoded with the video
if desired. You can use either the built-in microphone or an external microphone.
•
IP Filter.
Use the IP Filter to block/accept access to the IP addresses.
•
User-definable HTTP/ HTTPS port number
. This allows Internet Gateways
to use "port mapping" so the FCS-1091/WCS-1090 and a Web Server can share
the same Internet IP address.
•
DDNS Support.
In order to view video over the Internet, users must know the
Internet IP address of the gateway used by the FCS-1091/WCS-1090. But if the
Gateway has a dynamic IP address, DDNS (Dynamic DNS) is required. Since
many existing Gateways do not support DDNS, this function is incorporated into
the FCS-1091/WCS-1090.
•
NTP (Network-Time-Protocol) Support.
NTP allows the FCS-1091/WCS-
1090 to calibrate its internal clock from an Internet Time-Server. This ensures that
the time stamp on Video from the FCS-1091/WCS-1090 will be correct.
Security Features
•
User Authentication.
If desired, access to live video can be restricted to
known users. Users will have to enter their username and password before being
able to view the video stream. User authentication is not required if the Multicast
feature is enabled.
•
Password-Protected Configuration
. Configuration data can be password
protected, so that it only be changed by the FCS-1091/WCS-1090 Administrator.