LevelOne FCS-1091 - Manual (Page 22)

18
Chapter 4
Advanced Viewing Setup
This Chapter provides information about the optional settings and
features for viewing video via the FCS-1091/WCS-1090. This Chapter
is for the Camera Administrator only.
Introduction
This chapter describes some additional settings and options for viewing live Video:
• Adjusting the video image
• Controlling user access to the live video stream
• Making video available from the Internet
• Using
the Motion Detection feature
Adjusting the Video Image
If necessary, the FCS-1091/WCS-1090 Administrator can adjust the Video image.
Settings are provided for:
• Resolution - Select the desired resolution format. The larger sizes require greater
bandwidth.
• Video quality - This determines the degree of compression applied to the Video
stream. Higher quality requires greater bandwidth.
• Frame Rate - Select the max frame rate to determine the bandwidth required by
the video stream.
• Power Line frequency - Select 50Hz or 60Hz power line frequency, as used in
your region. The correct setting will improve the picture quality under florescent
lighting.
• White Balance - Select the correct white balance for your environment.
• Brightness - Adjust the brightness of the image.
• Sharpness - Select the desired option for the sharpness.
• Contrast - Select the desired option for the contrast. You can select a contrast
value between -3 and 3.
• Microphone - If enabled, audio can be included in the video stream.
• Time Stamp - If enabled, the time will be displayed on the Video image.
• Text Overlay - If enabled, up to 20 characters can be superimposed on the Video
image. This is useful for identifying the camera.
• Day/Night Switch - If enabled, the FCS-1091/WCS-1090 can get better video
quality even in the nighttime.
4