LevelOne FCS-1091 User Manual

Page 24

MJPEG Settings

Resolution

Select the desired video resolution format. The default
resolution is set to 320*240.

Fixed Video
Quality

Select the desired fix quality. The default fix quality is set to
Normal.

Max. Frame Rate

Select the desired Maximum frame rate for the video stream.

Mobil Settings

Enable Mobil
Streaming

Enable streaming video for the mobile device by checking this
checkbox.

Resolution

The default resolution is set to 160x120.

Video Quality
Control

• Constant Bit Rate: Select the desired fix bit rate.
• Fixed Quality: Select the desired option. The default fix

quality is set to Normal.

Max. Frame Rate

Select the desired Maximum frame rate for the video stream.
The default maximum frame rate is set to 15 fps.

Access Code

Enter the code for accessing the live video from camera
through cell phone connection.

Video Adjustments

Power line
frequency

Select the power line frequency (50Hz or 60Hz) used in your
region, to improve the picture quality under florescent lighting.

White Balance

Select the desired option to match the current environment
and lighting.

Brightness

If necessary, you can adjust the brightness to obtain a better
image. For example, if the camera is facing a bright light, the
image may be too dark. In this case, you can increase the
brightness.

Sharpness

Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.

Contrast

Select the desired option for the contrast. You can select a
Contrast value between -3 and 3.

Options

Microphone

Enable audio by checking this checkbox. Using Audio will
increase the bandwidth requirements slightly.

Audio Type

Select the desired audio type.

Speaker

Enable speaker feature by checking this checkbox.

Time Stamp

If enabled, the current time will be displayed on the Video
image.

Text Overlay

Enable this setting if you want text to be displayed on the
Video image, and enter the desired text - up to 20 characters.
This feature is often used to identify each camera when
multiple cameras are installed.