KB Electronics KBWA-23D - Manual (Page 2)

2
SAFETY WARNING
Definition of Safety Warning Symbols
Electrical Hazard Warning Symbol: Failure to observe this warning could result
in electrical shock or electrocution.
Operational Hazard Warning Symbol: Failure to observe this warning could
result in serious injury or death.
This product must be installed and serviced by a qualified technician,
electrician, or electrical maintenance person familiar with its operation and the
hazards involved. Proper installation, which includes electrical connections,
fusing or other current protection, and grounding, can reduce the chance of
electrical shocks, and/or fires, in this product or products used with this
product, such as electric motors, switches, coils, solenoids, and/or relays. Do
not use this drive in an explosion-proof application. Eye protection must be
worn and insulated adjustment tools must be used when working with drive
under power. This product is constructed of materials (plastics, metals,
carbon, silicon, etc.) which may be a potential hazard. Proper shielding,
grounding, and filtering of this product can reduce the emission of radio
frequency interference (RFI) which may adversely affect sensitive electronic
equipment. It is the responsibility of the equipment manufacturer and
individual installer to supply this Safety Warning to the ultimate end user of
this product. (SW 8/2012)
The drive contains electronic Start/Stop circuits, which can be used to start
and stop the drive. However, these circuits are never to be used as safety
disconnects since they are not fail-safe. Use only the AC Line for this purpose.
Be sure to read and follow all instructions carefully. Fire and/or electrocution
can result due to improper use of this product.
KBWA-23D: NEMA 1 / IP20 (Vented) Enclosure
KBWA-22D, 21D, 2P6D, 2P3D: NEMA 1 / IP50 (Non Vented) Enclosure
ITEMS INCLUDED IN THIS PACKAGE
Description Part No.
Drive —
Installation and Operation Manual A40179
Accessories Bag: Jumper Wire for J3 (to Set the Drive for 115 Volt AC Line
Input), Trimpot Adjustment Tool, Extra 6-32 X 3/8" Cover Screw, Status
Indicators Label, and two Universal Bushings.
F36869
Switch Kit Bag: Forward-Stop-Reverse Switch Assembly, Two Wire Ties,
and Installation Instructions.
F36868
Mounting Template A42326
Warranty Registration Card A40101