IDEC DS2_Series - Manual (Page 43)

DS2 series Instruction manual
42
9. CHECKS AND PERIODICAL MAINTENANCE
The following is a list of recommended check and maintenance operations that should be periodically
carried out by qualified personnel.
Check that:
• The operating distance and the alignment of the two units conforms to the indications given in section 2
“Installation mode” and section 10 “Technical data”.
• The DS2 device and external electrical connections are not damaged.
The frequency of the checks depends on the particular application and operating conditions of the light
grid.
The AREAscan
TM devices of the DS2 series do not require particular maintenance, with the exception
of the cleaning of the protective surfaces of the optics.
Use a cotton cloth dampened with water for cleaning.
Do not use under any circumstances:
• alcohol or solvents
• wool cloths of synthetic fabric
Disturbances that generate power supply shifts or lacks can open temporarily the outputs but do not
compromise the functioning of the light grid.
All appliances are under a 18 month guarantee from the manufacturing date. Datasensor will not be
liable for any damages to persons and things caused by the non-observance of the correct installation
modes and device use.
The warranty will not cover damages caused by incorrect installation, incorrect use and accidental
causes such as bumps or falls.
In presence of problems, please contact the DATASENSOR S.p.A. Technical Support:
Technical Support
Tel.:
+39 051 6765611
Fax.: +39 051 6759324
email: [email protected]