IAI America DS-S-P1 - Manual (Page 22)

Page 20
7 Point Edit Window
7.1 Explanation of the Items in the Point Edit Window
 From the menu select Point Edit.
‚ The point data selection window appears. Select the range of point numbers to be edited and click OK.
ƒ The controller point data window appears and has the following items.
No. This is the point number. Data input is not required.
ACC Specifies acceleration. The setting range is from 0.01 to the maximum acceleration in the
servo parameter.
Vel Specifies velocity. The setting range is from 1 to the maximum velocity in the servo param-
eter.
Axis 1~8 Specify the position of each axis. The setting range is -9999.999~9999.999.
„ Place the cursor at the last axis and press enter to move to the next line.