Harrington Hoists and Cranes SNER Hoist - Manual (Page 37)

37
8.0 Material Safety Data Sheets
NOTICE
The SNER hoists are shipped new with the oil for the gear box in separate container(s). In compliance with OSHA
regulations, Material Safety Data Sheets (MSDS) have been provided for the gear oil that is provided in this
separate container.
8.1 SNER Model Gear Box Oil Material Safety Data Sheet (MSDS)
SECTION I
MANUFACTURER’S NAME
EMERGENCY
TELEPHONE NUMBER TELEPHONE NUMBER
FOR INFORMATION
Nippon Oil Co., Ltd. 03-3502-9161 03-3502-1111
ADDRESS
3-12, Nishi Shimbashi 1-chome, Nimato-ku, Tokyo, 105 Japan
DATE PREPARED SIGNATURE OF PREPARER
Oct. 14, 1992 Signature on file at Harrington Hoists, Inc.
TRADE NAME AND SYNONYMS CHEMICAL NAME AND SYNONYMS
BONNOC M 260 Industrial gear oil
WARNING STATEMENT
CAUTION: Prolonged or repeated inhalation of fumes or contact with skin can be harmful.
SECTION II TYPICAL COMPOSITION
Base oil: (highly refined mineral oil) >94%
Additives: (Oxidation inhibitor, Rust inhibitor, Emulsion breaker, Antiwear Agent,
Antifoamer, Friction modifier)
<6%
Notes: These materials are listed in TSCA chemical substance inventory. The carcinogens that are
listed in federal OSHA, IARC, NTP are not used in this product.
SECTION III EXPOSURE STANDARD
No OSHA exposure or Threshold Limit Value (TLV) has been established for this material. The suggested TLV is 5
mg/m
3
for a daily 8-hour exposure.
This is the OSHA exposure standard and the TLV (1990-1991) for mineral oil mists.