Nstallation, Onfiguration – Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems User Manual
Page 84

- I
NSTALLATION
& C
ONFIGURATION
-
Each MX-1000 plugs into JP2A (1 x 30 pin header), JP2B (1 x 10 pin header), and JP3 (1 x 24 pin
header) on the AB/DR-3000. The first MX-1000 is mounted on the four 7/16Ó tall standoffs using four 1/4Ó
long round head machine screws. The remaining memory expansion cards are mounted using the sup-
plied 6-32 x 3/8Ó tall male/female standoffs with a 1/16Ó thick nylon washer under each. This maintains a
1/2Ó center-to-center spacing between the cards. On installations where two or more MX-1000s are in-
stalled on a DR-3000, the provided angle brackets can be used to anchor them to the RF-2000 front
panels. These are attached to the front of the MX-1000s using the provided 6-32 hardware, and then to
the wide DR-3000 front using the provided 6-32 x 1/4Ó Allen head machine screws.
The MX-1000s must be addressed using the sixteen position rotary dipswitch. Cards should be ad-
dressed sequentially starting at Ф1Х (the AB/DR-3000 itself is normally using the Ф0Х address). The LED on
each card will light as the AB/DR-3000 accesses its memory. This gives a quick way to diagnose any ad-
dressing problems you might have.
Eproms are installed in the MX-1000 in the following order. Shown below the EPROM numbers are the
.R?? number that the Sound Compressor software will name the EPROM files for the first two MX-1000
boards:
EPROM
#2
(.R46)
EPROM
#1
(.R45)
EPROM
#4
(.R48)
EPROM
#3
(.R47)
EPROM
#6
(.R50)
EPROM
#5
(.R49)
EPROM
#8
(.R52)
EPROM
#7
(.R51)
EPROM
#10
(.R54)
EPROM
#9
(.R53)
EPROM
#12
(.R56)
EPROM
#11
(.R55)
Second MX-1000
front of repeater
EPROM
#14
(.R58)
EPROM
#13
(.R57)
EPROM
#16
(.R60)
EPROM
#15
(.R59)
EPROM
#18
(.R62)
EPROM
#17
(.R61)
EPROM
#20
(.R64)
EPROM
#19
(.R63)
EPROM
#22
(.R66)
EPROM
#21
(.R65)
EPROM
#24
(.R68)
EPROM
#23
(.R67)
EPROM
#26
(.R70)
EPROM
#28
(.R72)
EPROM
#30
(.R74)
EPROM
#25
(.R69)
EPROM
#27
(.R71)
EPROM
#29
(.R73)
EPROM
#32
(.R76)
EPROM
#31
(.R75)
EPROM
#2
(.R02)
EPROM
#1
(.R01)
EPROM
#4
(.R04)
EPROM
#3
(.R03)
EPROM
#6
(.R06)
EPROM
#5
(.R05)
EPROM
#8
(.R08)
EPROM
#7
(.R07)
EPROM
#10
(.R10)
EPROM
#9
(.R09)
EPROM
#12
(.R12)
EPROM
#11
(.R11)
First MX-1000
front of repeater
EPROM
#14
(.R14)
EPROM
#13
(.R13)
EPROM
#16
(.R16)
EPROM
#15
(.R15)
EPROM
#18
(.R18)
EPROM
#17
(.R17)
EPROM
#20
(.R20)
EPROM
#19
(.R19)
EPROM
#22
(.R22)
EPROM
#21
(.R21)
EPROM
#24
(.R24)
EPROM
#23
(.R23)
EPROM
#26
(.R26)
EPROM
#28
(.R28)
EPROM
#30
(.R30)
EPROM
#25
(.R25)
EPROM
#27
(.R27)
EPROM
#29
(.R29)
EPROM
#32
(.R32)
EPROM
#31
(.R31)
G
ILDERFLUKE
& C
O
. ¥ 205 S
OUTH
F
LOWER
S
T
. ¥ B
URBANK
, C
ALIF
. 91502-2102 ¥ 818/840-9484 ¥
FAX
818/840-9485
76 of 92