Gilderfluke&Co 16 Bit CD-Quality Digital Audio Systems User Manual
Page 69
For compatibility with other products that might be on the same RS-422 serial network, this com-
mand asks you to enter a ÔYÕ or ÔNÕ. This lets them know that the setup mode has been exited on this
card. If you hit this command by mistake, then you can hit the
were before.
All other AB/DR-3000 and Brick Brains in the same serial network have their serial ports disabled while
any card in the system is in setup mode. This is the only command to which they will respond. After the
initial 'X', all the other cards wait for a 'Y' or 'N' before they will start accepting other serial commands
again. If you find that you are having trouble communicating with any of the cards in the system, try en-
tering an ÔXNÕ to trick it into thinking you have exited the configuration mode.
G
ILDERFLUKE
& C
O
. ¥ 205 S
OUTH
F
LOWER
S
T
. ¥ B
URBANK
, C
ALIF
. 91502-2102 ¥ 818/840-9484 ¥
FAX
818/840-9485
61 of 92