Sonic Charge Microtonic User Manual
Page 28
the pitch wheel will affect all channels simultaneously, while in
Pitched Mode, it will
affect individual channel.
Enable MIDI Program Change
Enable this option to make
Microtonic
switch between the 16 program slots when it
receives
MIDI Program Change messages. Messages with program numbers
above 16 will be ignored.
Stop voices with MIDI Note Off
Turning this option on will make
Microtonic
mute voices on
MIDI Note Off mes-
sages. This allows you to change the length of drum sounds by changing the length
of the notes in your sequencer. It is also useful when using
Pitched MIDI Mode to
sustain held midi keys.
Select drum channel with MIDI notes
When this option is turned on,
Microtonic
will select drum channels as you trigger
them from your MIDI keyboard. This feature is especially useful in combination with
the
MIDI CC Operate On Selected Channel option if you plan to use the MIDI
controller mapping features to edit your drum patches.
Pattern Engine Sends MIDI Notes
Turn this option on to have
Microtonic
transmit MIDI notes for the patterns it plays.
To the extent that your host preset supports it, you can use this option to trigger
other MIDI devices and plug-ins from
Microtonic
. The MIDI keys transmitted are the
same as for reception
(normally C1 to G1)
and can be edited as described in
MIDI CC operate on selected channel
Normally, MIDI controllers that you map are mapped to parameters of specific drum
channels in
Microtonic
. If you instead want to map MIDI controllers to drum patch
parameters regardless of channel you should use this option. When MIDI controllers
operate on current drum channel only is turned on, any MIDI controller action will
affect the currently selected drum channel only. This feature is especially useful if
you plan to use your hardware MIDI controller for editing drum patches. Notice that
28!
!
© 2013 NuEdge Development
Figure 9 MIDI Config Dialog