Sonic Charge Microtonic - Manual (Page 12)

‣ Save Drum Patch
Brings up a “save dialog” that lets you save the current drum patch parameters
(of the selected channel) into a Microtonic drum patch file (file extension
“.mtdrum”) .
‣ Cut Drum Patch
This menu copies the current drum patch parameters (of the selected channel)
onto the clipboard and resets the parameters in Microtonic .
‣ Copy Drum Patch
This menu copies the current drum patch parameters (of the selected channel)
onto the clipboard.
‣ Paste Drum Patch
This menu pastes drum patch parameters from the clipboard. The patch on the
clipboard will replace the parameters of the selected channel.
(Only available if a
Microtonic drum patch is available on the clipboard.)
‣ Initialize Drum Patch
This menu choice will reset all drum patch parameters of the selected channel to
their default settings.
‣ Exchange Drum Patch / Clipboard
This menu choice exchanges the drum patch parameters on the clipboard with
the parameters of the selected channel in
Microtonic . This feature is useful if you
would like to toggle between two different versions of a patch. Copy the first ver-
sion, change the parameters
(or load a new patch) and use this function to swap
between the two different patches. It is also useful if you want to swap the drum
patches of two different channels.
(Only available if a Microtonic drum patch is
available on the clipboard.)
‣ Transpose Drum Patch
This will let you transpose the drum patch by an arbitrary number of semitones up
(positive) or down (negative) . You can enter decimals for a finer precision than
whole semitones.
‣ Alter Drum Patches
Use this function to make minor random adjustments to the drum patch.
‣ Randomize Drum Patch
Use this function to randomize the drum patch entirely.
Open Drum Patch Button
Press this button to bring up an “open dialog” that lets you load a Microtonic drum
patch file (file extension “.mtdrum or “.mtdp”). The loaded patch will replace the cur-
rent patch parameters of the selected channel.
(This is a shortcut for “Open Drum Patch” in the Drum Patch Menu.)
Save Drum Patch Button
Press this button to up a “save dialog” that lets you save the current drum patch
parameters
(of the selected channel) into a Microtonic drum patch file (file extension
“.mtdrum”) .
(This is a shortcut for “Save Drum Patch” in the Drum Patch Menu.)
12! ! © 2013 NuEdge Development