SKC Limited Flite 2 - Manual (Page 5)

www.skcltd.com 901-FTM Issue I Page 3
Specifications
Pump Features
Battery capacity options
Choose from two capacities of internal battery - 3.2Ah (Part No. P901201), for
applications where a lightweight pump is desirable, or 7Ah (Part No. P901202), where
longer run times or multiple samples on a single charge are required.
Intelligent battery charging
The SKC lead/acid battery charger (Part No. 901-210), provides optimum charging in the
minimum possible time. The charger automatically detects when the battery is fully charged
and switches to a trickle charging rate to prevent over-charging. Typical charging times for a
fully discharged battery are 5 hours for 3.2Ah battery and 10 hours for 7Ah battery.
External power supply options
The pump can be powered by a mains adaptor (Part No. 901-211) suitable for 100-240V
~ 50/60Hz mains supplies, or by an external high capacity 12V lead/acid battery (such
as Part No. P901107 - 12Ah) using an external battery hookup cable (Part No. 901-212).
Flow fault
Fault shutdown with indication on LCD screen, plus run time display retention, if flow is
restricted.
Low battery
Low battery shutdown with indication on LCD screen, plus run time display retention, in
the event of a low battery condition.
Timer display LCD screen indicates sample run time in hours, minutes and seconds.
Programmable run time Sample run time programmable in hours and minutes, via keypad and LCD screen.
Programmable delayed start time
Sample start delay time programmable in hours and minutes, via keypad and LCD
screen. Start delay countdown display on LCD screen in operation.
Programmable repeat runs
Number of sample period repeats programmable via keypad and LCD screen. Indication
of sample period repeats on LCD screen in operation.