SKC Limited Flite 2 - Manual (Page 21)

www.skcltd.com 901-FTM Issue I Page 19
Operating the Flite 2 Pump
3) Timed Run with Delayed Start
Having previously programmed a timed run with delayed start,
start the pump as detailed for manual run. On accepting the
‘YES’ option in the ‘START NOW ?’ screen the ‘TIME TO START’
screen is displayed. This screen displays the start delay time in
hours, minutes and seconds, and counts down to ‘000:00:00’.
TIME TO START
000:29:52
At the end of the start delay time the pump will automatically
start and the ‘ELAPSED TIME’ screen is displayed.
ELAPSED TIME
000:00:16
At the end of the timed run the pump will automatically stop
and retain the elapsed run time on the LCD screen.
ELAPSED TIME
001:00:00 OK
4) Timed Run with Repeat Runs
Having previously programmed a timed run with repeat runs,
start the pump as detailed for manual run. On accepting the
‘YES’ option in the ‘START NOW ?’ screen the ‘TIME TO
START’ screen is displayed. This screen displays the start
delay time in hours, minutes and seconds, and counts down
to ‘000:00:00’. It also displays the sample repeat number
and the total number of repeats. The first sample period is
repeat zero.
TIME TO START
000:29:52 R00/02