SKC Limited Flite 2 User Manual

Page 20

Page 18

901-FTM Issue I

www.skcltd.com

Operating the Flite 2 Pump

To stop the pump at the end of the required sample period,
press the

and select keys simultaneously. The LCD

screen will appear as shown.

ELAPSED TIME

001:00:03

STOP

Press the keys in the sequence

and the

‘CHECK FLOW ?’ screen is displayed.

CHECK FLOW ?

YES/no

If required the flow rate can be checked to verify that it has
remained within the required tolerance during the sample
run. Alternatively, select the ‘NO’ option and press

and

the pump will go into Sleep mode.

CHECK FLOW ?

yes/NO

SAMPLING

PUMP

SLEEPING

2) Simple Timed Run

Having previously programmed a simple timed run without delayed start and repeat runs, start the pump as
detailed for manual run. On accepting the ‘YES’ option in the ‘START NOW ?’ screen the pump will display the
‘ELAPSED TIME’ screen and the elapsed time will count up until the end of the programmed run time is reached.

At the end of the timed run the pump will automatically stop
and retain the elapsed run time on the LCD screen.

ELAPSED TIME

001:00:00