SKC Limited Flite 2 - Manual (Page 16)

Page 14 901-FTM Issue I www.skcltd.com
Programming the Flite 2 Pump
Press to save the start delay time and display the next
menu screen.
Æ
REPEAT RUN AND D
YES/no
To program repeat sample run and delay times select the
‘YES’ option, and press
to display the next menu
screen. Alternatively, select the ‘NO’ option, and press
to display the ‘REVIEW DATA ?’ menu screen. Refer
to section - Operation 5) Reviewing Sampling Programs, for
further details.
Æ
ENTER NUMBER OF
REPEATS =
1
Use the and keys to enter the required number of
sample run and delay time repeats, and press to save
the number of repeats and display the ‘REVIEW DATA ?’
menu screen. For example entering 2 repeats will give a total
of 3 sample runs and delays.
/ Æ
ENTER NUMBER OF
REPEATS =
2
Æ
REVIEW DATA ?
yes/NO
5) Reviewing Sampling Programs
Once a sampling program has been entered the pump
displays the ‘REVIEW DATA ?’ menu screen. This enables
the programmed settings to be viewed and amended if
required. To review the settings select the ‘YES’ menu
option and press
to display the first review screen.
Alternatively, select the ‘NO’ menu option and press
to display the ‘START NOW ?’ screen. Refer to section -
Operating the Flite 2 Pump for further details.
REVIEW DATA ?
YES/no
Æ
CHECK FLOW ?
yes/NO