SKC 100-3901 DPS (Deployable Particulate Sampler) System - Manual (Page 12)

9
Battery Replacement
1. Record all necessary data before unplugging the pump from the batt ery.
2. Remove the plug on the connecting cable from the jack on the batt ery adapter
(on top of the external batt ery assembly).
3. Insert the plug on the connecting cable into the batt ery adapter jack on a new,
fully charged external batt ery assembly.
4. Insert the external batt ery assembly into the foam compartment in the case.
Ensure there is no tension on the connecting cable.