Silicon Power PSM 80 BA A10_Power Semiconductor Half-Bridge Module - Manual (Page 3)

PSM80BA10
Power Semiconductor Half-Bridge Module
Notes
1.) Measurements made with a 10 Ohm shorting resistor
connected
between the gate and cathode.
2. ) Case Exterior Assummed to be 0.002" of 63Sn/37Pb solder
applied
directly to cathode bond area of ThinPak.
3. ) Performance guarenteed by design only.
4. ) Production testing is limited to 2KV prior to encapsulation.
5. ) Characterization accomplished using Rgk=10 ohms.
CAO 05/28/09
SILICON POWER
CORPORATION
275 Great Valley Parkway
Malvern, PA 19355
Ph: 610-407-4700
Fax: 610-407-3688
www.siliconpower.com