ALESIS MIXING CONSOLES - Manual (Page 52)

USING MIDIVERB III
47
MIDI PROGRAM
CHANGE
Pressing the MIDI button a second time accesses the MIDI Program
Change page which allows the MIDIVERB III to change programs
remotely by a MIDI Program Change command. The MIDIVERB III will
also send Program Change commands when programs are selected
from the front panel. When used in conjunction with the
VERB PROGRAM
button, the MIDIVERB III transposes the program numbers of a MIDI
controller (a synthesizer, for instance) to match those of the MIDIVERB
III .
SELECTING MIDI PROGRAM CHANGE
1) When in the EDIT mode ( either EDIT LED lit), press the MIDI
button TWO times. The numeric display will read "Pon" if MIDI
Program Change is on, and "Pof" if MIDI Program Change is
off.
Pof
2) Press the VALUE "Up" button to toggle MIDI Program Change
"On"; Press the VALUE "Down"button to toggle MIDI Program
Change "Off".
Pon
MIDI ECHO
Pressing the MIDI button a third time accesses the MIDI Echo page which
allows any MIDI information received by the MIDIVERB III (with the