ALESIS MIXING CONSOLES - Manual (Page 30)

USING MIDIVERB III
25
ro1
3) Select the desired function to be edited. The stored value of
the parameter will appear in the numeric display and the
button will light up.
In this case we will edit the DELAY TIME. When we select the
DELAY button, the display will read:
080
4) Press either VALUE button to adjust the desired parameter.
5) Select another function to be edited, if desired.
PLEASE NOTE:
—
Once a parameter has been edited, the dot to the right of the right-
most numeric digit will light when in PROGRAM mode (program
number displayed and PROGRAM LED lit).
—
At this point, selecting a new program either by the VALUE buttons or
the keypad will cause the edited program to be lost. Be sure to save
your program first! (See next section)
—
The parameters on the bottom row of buttons can be selected when
either Edit LED is on.
—
At any time you can return to the default selection or value by
pressing both VALUE buttons at the same time.
MIDIVERB III PROGRAMMABLE
FUNCTIONS