ALESIS MIXING CONSOLES - Manual (Page 10)

QUICK START
5
SECTION 1
MIDIVERB III QUICK START
FACTORY PROGRAMS
The MIDIVERB III contains 200 factory supplied programs, 100 of which
are stored in memory locations 000 to 099 and repeated again in
locations 100 to 199.
Only the programs in locations 100 to 199 can be permanently altered
and stored as desired by the user.
SELECTING PROGRAMS
1) Press the PROGRAM button. The LED in the middle of the
button will light.
2) Press either VALUE button until the desired program is
displayed.
or
2A) Select a 3 digit program number from the numbered function
buttons on the right within 4 seconds.
PLEASE NOTE:
—
If only one or two digits are selected within 4 seconds, the display will
revert back to the previous program number.
—
When the MIDIVERB III is first powered up, the unit will be in the
PROGRAM mode and will display the last program that was selected
before being turned off.
EDITING PROGRAMS
1) Select the EDIT button. The lower of the two LEDs adjacent to
the EDIT button will light and the PROGRAM LED will turn off.
This indicates that the bottom row of functions of the top row of
buttons can be accessed.