Editing a program – ALESIS MIXING CONSOLES User Manual

Page 29

SECTION 4

Pon

3) Press the "Up"

VALUE

button until display read "Pon"

4) Set program 023 on the MIDIVERB III to correspond with the

desired program number on your synth, sequencer, or other
MIDI device. (see " How to Use MIDI Mapping" on page
xxxxxxx).

5) Send the program change from your synth, sequencer, or

other MIDI device.

EDITING A PROGRAM

Any MIDIVERB III program can be easily edited (modified) by entering
the EDIT mode. As an example, we will edit our program 023.

1) Select the

EDIT

button. The lower of the the two LEDs

adjacent to the

EDIT

button will light, the PROGRAM LED will

turn off, and the LED for the function or parameter last
selected will light.
This indicates that the bottom row of functions of the top row of
buttons can be accessed, so now the

REVERB

DELAY

CHORUS

, and

MIX

buttons will control REVERB DECAY,

DELAY REGENERATION, CHORUS SPEED, EFFECT EQ,
and DELAY MIX. (The illustration indicates a Reverb Decay
time of 50).

2) Pressing the

EDIT

button again will select the upper LED which

indicates that the top row of edit functions on the top row of
buttons can be accessed.
Now the

REVERB

DELAY

CHORUS

, and

MIX

buttons control

REVERB ALGORITHM, DELAY TIME, CHORUS
ALGORITHM, INPUT EQ, and REVERB MIX. (The illustration
indicates that a Reverb Algorithm of "ro1" or Room 1 has been
chosen).