ALESIS MIXING CONSOLES - Manual (Page 32)

USING MIDIVERB III
27
REVERB DECAY
The Reverb Decay determines the length of time that the Reverb will
sound before it finally fades away. It is not used in the Reverse 1 and 2
Algorithms. It is functional in all others.
DELAY
The Delay section of the MIDIVERB III can be used in two modes,
depending upon the configuration. In some configurations, the Delay
acts as a straight mono Digital Delay which can be programmed for up to
490 milliseconds. In other configurations that feature the Reverb of
MIDIVERB III , it will be used as a Pre-Delay for the Reverb section with
a maximum setting of up to 100 milliseconds.
The programmable parameters are:
DELAY TIME
Delay Time is the amount of time between the original signal and the first
repeat, or echo, of the signal.
DELAY REGENERATION
Delay Regeneration means that a portion of the delay signal output is
"fed back" into the input, resulting in the delay repeating itself. The more
regeneration, the more repeats.
CHORUS
The Chorus section of the MIDIVERB III is primarily used to slightly
change the pitch of the signal fed into the unit. This is done to make the
input signal thicker and bigger sounding.
The programmable parameters are:
CHORUS
ALGORITHM