ALESIS MIXING CONSOLES User Manual

Page 26

INTERFACING MIDIVERB III

2) Now turn the

OUTPUT LEVEL

control up (clockwise) until there is

sufficient level at the amplifier or mixer. Be careful not to turn
the

OUTPUT LEVEL

control up too high since the strong signal

may cause your amplifier or mixer to overload.

3) Next, turn the

MIX

control until the correct balance between

effect and direct signal is reached.

PLEASE NOTE:

For

optimum signal-to-noise ratio (quietest operation), it is always best to have the

INPUT

LEVEL

control turned up as high as possible, but not so much that the

Clip LED

lights.