Setup – ALESIS MIXING CONSOLES User Manual
Page 25
SECTION 3
20
CONNECTION TO THE MAIN OUTPUTS
Still another way of interfacing the MIDIVERB III to a mixer or recording
console would be in-line across the output of your mixing console (See
Figure 4).
This setup would be used only if you needed to effect the entire mix.
FIGURE 4
STEREO CONNECTION TO THE CONSOLE MAIN OUTPUTS
MAIN OUT
LEFT
MAIN OUT
RIGHT
LEFT INPUT
RIGHT INPUT
LEFT OUTPUT
RIGHT OUTPUT
TO MIXDOWN DECK
OR SOUND SYSTEM
SETUP
After you have connected your MIDIVERB III to either an instrument or
mixing console:
1) Turn the
INPUT LEVEL
control up until the green
SIGNAL
LED
Indicator lights (It's OK if the red Clip LED occasionally lights,
but distortion will result if it remains on constantly).