ALESIS MIXING CONSOLES - Manual (Page 19)

SECTION 2
14
The other half of the MIDI program MAPPING section when in the EDIT
mode, the
INT. PROG (Internal Program) button selects the internal
MIDIVERB III program (from 000 to 199) that will be chosen by the
external MIDI program number that is selected by the
MIDI PROG button.
When in the PROGRAM mode, this is button 0 of the keypad for
selecting a program by directly entering the desired program number.
BYPASS
The BYPASS button bypasses the effects of the MIDIVERB III and
supplies only Direct Signal Level to the stereo outputs. When the signal
is bypassed, the
BYPASS LED will light.
BYPASS is also connected to the Bypass Jack on the rear panel and can
be activated by a momentary footswitch.
BACKPANEL
INPUT JACKS
(Left & Right)
Accepts from musical instrument to line level input signals.
Use the Right Input Jack for mono.
OUTPUT JACKS
(Left & Right)
Stereo output of the MIDIVERB III.
Use the Right Output Jack for mono.
MIDI IN JACK
Receives all MIDI information.
MIDI OUT/THRU
JACK